Home > SI Documentation (v16) > User Guide > Reports > Standard Reports > Brother Wire Label Printer

Brother Wire Label Printer

Table of contents

This page describes the Brother Wire Label Printer report.

 

brother wire label.jpg

 

The two primary print devices that work with this report are the Brother PT-P900W and PT-P950NW. They look like this:

 

                          pt-p900w.png       pt-p950nw.png

 

These printers come with Brother P-Touch software that allows you to create your own wire label templates. All of the stock SI templates were designed to be used with .94" label tape similar to this option. For a complete list of print devices that the Brother SDK supports click here.

 

Note: Although the Brother SDK may support more printers than the two listed above, those are the only two printers supported by SI.

 

By default, only connected wires display on this report, e.g. wire shapes are connected to shapes/blocks in a Visio/AutoCAD drawing. However, there is a Report Setting if you want unconnected wires to display in this interface.

 

Note: If you are using the 64-bit version of Visio or AutoCAD, you must run the Brother Wire Label Report from directly within the Project Explorer, not from within either drawing interface.

Interface

 

When you generate this report, the following interface opens:

 

brother label interface.jpg

 

The fields that you can choose from for your labels are: Wire Number (Wire Component ID), Head End, Location, Source Component ID, Destination Component ID, From Manufacturer, From Model, To Manufacturer, To Model.

 

You can choose which fields display by clicking the Field Chooser button. A window will open to allow you to choose which fields you want:

 

field chooser.jpg

 

To select an order, drag the columns into the desired position:

 

dragging columns.jpg

 

The Label Template dropdown menu displays the stock SI templates for these wire labels:

 

label list.jpg

 

You can fill in the Note field if you want to put a message on the labels:

 

notes.jpg

 

When you select a template, a preview will display:

 

preview.jpg

 

Note: You must have the Brother P-Touch software installed for the preview to display. Also, the image on the stock templates appears fuzzy in the preview but that is just a display issue, the image prints nicely.

 

You can either print all of the labels, or you can select the ones you want by using Shift or Ctrl on your keyboard. There are Print All and Print Selected buttons in the upper left corner of the interface:

 

print buttons.jpg

 

The print device automatically scores each label for easy peeling.

Customization

 

Custom templates can be built based off of our existing templates using the Brother P-Touch software. Click here for instructions.

 
Last modified

Tags

This page has no custom tags.

Classifications

This page has no classifications.