Home > SI 2017 Documentation > Administrator Guide > Installing SI 2017 > Connecting to the SI 2017 Server

Connecting to the SI 2017 Server

Connecting a SI 2017 Client

 

In order to work in a SI 2017 Client, you must be connected to your SI 2017 Server. The first time you launch an SI 2017 Client, you will be prompted to connect to the SI 2017 Server on your network:

 

 

When you use our Express options when configuring you SI 2017 Server, a default admin username and password are created. If you did not change these during the configuration, the defaults are shown below:

 

Username: admin

Password: admin

 

Here you can enter your own User Name and Password if you have been set up as a SI 2017 user.

 

Remember me - will remember your User Name and Password do you don't have to enter it each time you connect

Connect automatically - when you launch the SI 2017 Client in the future you won't be prompted with this connect form

Name or IP Address - enter in the computer name or IP address of the machine where your SI 2017 Server is installed

Port - the default port when using our Express configuration of the SI 2017 Server is 9010. If you used the Custom configuration option and changed this port, enter your port number here

 

If this is the first time that someone in your company has logged in to an SI 2017 Client, you will then be prompted to register the software.

 

If at any point you become disconnected from your SI 2017 Server, you can always attempt to reconnect via the Start menu:

 

Disconnect an SI 2017 Client

 

If you disconnect from the SI 2017 Server, you will not be able to edit anything in your SI 2017 Catalog. You will only be able to create new Projects and view Projects that are Checked Out to you. This frees up the license of SI 2017 that you were using for another user to use.

 

Last modified
15:41, 26 Jul 2017

Tags

This page has no custom tags.

Classifications

This page has no classifications.